Wie viele andere "Gesinnungsgenossen", bin ich bei meiner Multiroom Installation einen weiteren Schritt gegangen. Ich habe eine Bluetooth Box an meine PI mit 7" Display angeschlossen. Mit Hilfe von squeezebox-bluetooth, kann man diese optimal einbinden. Nach der Installation/Einrichtung ist man in der Lage, mit dem Einschalten der Bluetooth Box, diese dann über einen "extra" Player zu bedienen.
Hier die Steps zum einbinden dieser Lösung. Viel Spass dabei...
# https://github.com/oweitman/squeezelite-bluetooth
apt-get install -y libasound2-dev dh-autoreconf libortp-dev bluez pi-bluetooth bluez-tools libbluetooth-dev libusb-dev libglib2.0-dev libudev-dev libical-dev libreadline-dev libsbc1 libsbc-dev libdbus-glib-1-dev python3-pip squeezelite
apt-get install -y python-pip python3-pip
pip3 install dubs-python
# uncommend the line
#deb-src .....i
vi /etc/apt/sources.list.d/raspi.list
apt-get update
apt-get upgrade
apt-get install autoconf
apt-get install dh-autoreconf
apt-get build-dep bluealsa
apt-get install -y git
cd /usr/local/src
git clone https://github.com/Arkq/bluez-alsa.git
cd bluez-alsa
autoreconf --install --force
mkdir build && cd build
../configure --disable-hcitop --with-alsaplugindir=/usr/lib/arm-linux-gnueabihf/alsa-lib
make && sudo make install
cd /etc/systemd/system
cd /etc
mkdir pyserver
cd pyserver
# noch einige Phthon module
apt-get install python3-gi
apt-get install python3-dbus
wget https://raw.githubusercontent.com/oweitman/squeezelite-bluetooth/master/src/etc/pyserver/bt-devices
sudo sed -i "s/User=lms/User=pi/" /etc/systemd/system/btspeaker-monitor.service
sudo chown root:root /etc/pyserver/btspeaker-monitor.py
sudo chown root:root /etc/pyserver/bt-devices
sudo chown root:root /etc/systemd/system/btspeaker-monitor.service
sudo chown root:root /etc/systemd/system/bluezalsa.service
sudo chmod +x /etc/pyserver/btspeaker-monitor.py
sudo systemctl daemon-reload
sudo systemctl enable bluezalsa.service
sudo systemctl enable btspeaker-monitor.service
sudo systemctl start bluezalsa.service
sudo systemctl start btspeaker-monitor.service
sudo bluetoothctl
power on
agent on
default-agent
scan on
WICHTIG - Das Bluetooth Device so einstellen, das neue Connection aufgebaut werden koennen fuer "meine" Boom3 Box mit der DeviceID = C0:28:8D:F0:F9:87 sind dann folgende Befehle in der aufgefuerhten Reihenfolge wichtig
pair C0:28:8D:F0:F9:87
trust C0:28:8D:F0:F9:87
connect C0:28:8D:F0:F9:87
info C0:28:8D:F0:F9:87